The Effect Of Image Taking Conditions On Image Quality - Nokia 6680 RM-36 Service Manual

Nokia Customer Care
Sharpness

The effect of image taking conditions on image quality

There are some factors, which may cause poor image quality, if not taken into account by the end user when
shooting images, and thus may result in complaints. The items listed are normal to camera operation and are
not a reason for changing the camera module.
Distance to target
The lens in the module is specified to operate satisfactorily from 40 cm to infinite distance of scene objects. In
practice, the operation is such that close objects may be noticed to get more blurred when distance to them is
shorter than 40 cm. The lack of sharpness is first visible in full resolution (1280 x 1024) images. If observing just
the viewfinder, even very close objects may seem to appear sharp. This is normal; do not change the camera
module.
The amount of light available
In dim conditions camera runs out of sensitivity. The exposure time is long (especially in the night mode) and
the risk of getting shaken (= blurred) images increases. In addition, image noise level grows. The maximum
exposure time in the night mode is ¼ seconds. Therefore, images need to be taken with extreme care and by
supporting the phone when the amount of light reflected from the target is low. Because of the longer exposure
time and larger gain value, noise level increases in low light conditions. Sometimes blurring may even occur in
daytime, if the image is taken very carelessly. See the figure below for an example. This is normal; do not change
the camera module.
Page 8–6
Good quality images are 'sharp' or 'crisp', meaning that image details are
well visible in the picture. However, certain issues, such as non-idealities in
optics, cause image blurring, making objects in picture to appear 'soft'. Each
camera type typically has its own level of performance.
Figure 77 Blurred image. Target too close.
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
Camera Module Troubleshooting
RM-36
Issue 1