Nokia 6680 RM-36 Service Manual page 236

Nokia Customer Care
Frequency:
Level:
Modulation:
Deviation:
Modulation frequency:
5. Click OK.
6. Change frequency to 2166.6 MHz and click OK.
7. Check that the tuned values are within the limits specified in the table below:
Frequency compensation low
Frequency compensation high
i If the values are OK, click Yes to save the values.
8. Close the tuning window.
Alternative steps
• From the "Operating mode" dropdown menu, set mode to "Local".
• From the Tuning menu, choose WCDMA -> Rx AGC Alignment.
• Click Start.
• Check the "Tune Rx Band Response" checkbox and click Tune.
• Setup the signal generator according to the values in the pop-up window:
Page 7–48 Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
RF Troubleshooting and Manual Tuning Guide
2113.4MHz
–48 dBm + cable and adapter attenuations
FM
500 kHz
50 kHz
Min
-5
-5
RM-36
Max
+5
+5
Issue 1