RH-109
RF troubleshooting
Receiver troubleshooting
Introduction to receiver (RX) troubleshooting
RX can be tested by making a phone call or in FTM mode. For the FTM mode testing, use Qualcomm software.
The main RX troubleshooting measurement is RSSI reading. This test measures the signal strength of the
received signal. For CDMA RSSI measurements, see CDMA RX chain activation for manual measurements.
CDMA RX chain activation for manual measurement
Prerequisites
Make the following settings in Qualcomm software and in the signal generator.
Setting
Channel
Signal generator to antenna connector
Issue 1
384
881.52 MHz
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
Band 0
Band 1
600
1960 MHz
Band 15
425
2131.25 MHz
Page 4-9