Nokia 6680 RM-36 Service Manual page 160

Nokia Customer Care
Programming is completed when "Flashing Completed" message is displayed.
The product type designator and MCU SW version are displayed at the bottom of the screen.
vi Close the SW Update window and then from the File menu, choose Close product.
2. Create a Request file.
For this procedure, you must supply +12 V to CU-4 Control Unit from an external power supply.
i To connect the phone with Phoenix, choose File –> Scan Product.
ii From the Tools menu, choose "Certificate Restore".
iii To choose a location for the request file to be saved, click "Browse".
Page 6–32 Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
BB Troubleshooting and Manual Tuning Guide
RM-36
Issue 1