Phoenix Service Software Data Package Overview; Installing Phoenix Data Package - Nokia 6680 RM-36 Service Manual

RM-36
Service Software Instructions
3. In the following view, select Repair.
Phoenix will now reinstall components and register them.
The procedure is the same as when updating Phoenix.
4. To complete the repair, click Finish.

Phoenix service software data package overview

Each product has its own data package (DP). The product data package contains all product-specific data files
to make the Phoenix service software and tools usable with a certain phone model.
The data package contains the following:
• Product software Binary files
• Files for type label printing
• Validation file for the Faultlog repair data reporting system
• All product-specific configuration files for Phoenix software components
Data files are stored under C:\Program Files\Nokia\Phoenix (default).

Installing Phoenix data package

Before you begin
• A product-specific data package contains all data to make the Phoenix service software and tools usable with
a certain phone model.
• Check that the dongle is attached to the parallel port of your computer.
• Install Phoenix service SW.
• Download the installation package (for example, XX-XX
C:\TEMP).
• Close all other programs.
*
( = type designator of the product)
If you already have Phoenix installed on your computer, you will need to update it when a new version is
released.
Issue 1
Figure 10 Repair program
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
*
_dp_EA_v_1_0.exe) to your computer (for example, in
Nokia Customer Care
Page 3–11