Nokia 6680 RM-36 Service Manual page 254

Nokia Customer Care
Incorrect version
number read from the
TX_IC (0x0008)
Propable cause: Propable cause:
Poor solder/Faulty VINKU
Poor solder/faulty Vinku
Other possible reasons:
Other possible reasons:
VDIG connection between
VDIG connection between
RETU & VINKU
RETU & VINKU
Please, refer to chapter
interpretation is needed.
A-8
ST_CDSP_RF_BB_IF_TEST FAILURE PAGE_2 ST_CDSP_RF_BB_IF_TEST FAILURE PAGE_2
Register write - read cycle Register write-read cycle
NO NO
failed (RX)
failed (RX)
(0x0004)
(0x0004)
YES YES YES
Propable cause:
Propable cause:
Faulty HINKU
Faulty HINKU
Error Code Interpretation Examples
Company Confidential
Copyright © 2005 Nokia. All rights reserved
TX_IC is not reset correctly TX_IC is not reset correctly
NO NO
NO NO NO
(0x0010)
(0x0010)
YES YES YES
NO NO
Is TXRESETX signal OK? Is XRESETX signal OK? T
YES YES YES
Propable cause:
Propablecause:
Faulty VINKU
Faulty VINKU
Propable cause:
Propablecause:
Solder problem/faulty RAP Solder problem/faulty RAP
Other possible reasons:
Other possible reasons:
Short circuit under VINKU/
Short circuit under
Faulty VINKU
VINKU/Faulty VINKU
if more information about error code
Appendix A: RF Troubleshooting
Register write - read cycle Register write-read cycle
NO NO
failed (TX)
failed (TX)
(0x0012)
(0x0012)
YES YES
Propable cause:
Propable cause:
Faulty VINKU
Faulty VINKU
It's not possibleto It's not possible to
get here...
get here...