Smart I SmartHome Security System Installation And Operating Instructions Manual page 63

Manual-2.0-Final_Layout 1 04/04/2016 17:32 Page 63
To Deactivate the Repeater Mode
1. Unplug the repeater Power Switch.
2. Press and hold the button in front of the switch and plug the switch back to the socket with the
button pressed, do not let go of the button until the LED begins to flash (Blue).
The LED indicator on the repeater Power Switch now should light up in Blue, indicating the
repeater function has been deactivated.
Both Power Switch and the end sensor will require pairing with the SmartBox to resume their
normal operation. Please see 'Sensor Pairing' section for more details.
63