Smart I SmartHome Security System Installation And Operating Instructions Manual page 45

Manual-2.0-Final_Layout 1 04/04/2016 17:32 Page 45
Both the 'One-touch Scenario' and the 'Sequence Scenario' are designed for your system to carry
out customised security functions after setup, such as activate single/multiple cameras and
sensors for recording and alert.
One-touch Scenario
Allowing you to conveniently activate the security function with a single touch when required. The
one-touch scenario section has three default controls and they connect with the control
buttons on the remote controller. You can customize the content of each to fit your needs. After
setup, the control buttons on the remote will carry out the same commands as the one-touch
scenarios in the App.
Scenario
ARM Camera Panic
45