Smart I SmartHome Security System Installation And Operating Instructions Manual page 17

Manual-2.0-Final_Layout 1 04/04/2016 17:31 Page 17
(3) Launch the 'Smart-i Protect' App. The App will first search for the SmartBox connected to the
home Wi-Fi router and retrieve the DID automatically (DID- The Device ID is 12 characters long
and consists of numbers 0 - 9 and letters A - F). Please assign the SmartBox with your preferred
System Name and enter the Default Security Code '123456', tap to complete the setup. If the
SmartBox DID/Security Code cannot be retrieved, please check to make sure it is powered on and
the Ethernet cable is securely connected to the Wi-Fi router. Also make sure your mobile device is
connected to your WiFi router.
The newly added SmartBox will now appear and you can tap it to enter the system and continue
with setup for camera(s), sensor(s), switch(es) and remote control.
NOTE: (1) The SmartBox should be powered on and connected to the Wi-Fi router at all times.
(2) Should you need to enter the SmartBox DID/Security Code manually, the DID information
is located at the bottom of the SmartBox and the default Security Code is '123456'.
17