Pairing The Power On/Off Switch - Smart I SmartHome Security System Installation And Operating Instructions Manual

Manual-2.0-Final_Layout 1 04/04/2016 17:31 Page 23
(4) Enter 'Device Name' and 'Location', tap 'Save' to complete the pairing process. The newly
paired sensor will now display in the App's 'Status' section.
Verifying the Setup
After pairing is complete, face the motion sensor towards a wall where no movement can be
detected, wait for few minutes for the sensor to complete condition analysis. Wave your hand in
front of the sensor and the alert indicator should appear next to the motion sensor section on the
status page of the App.
NOTE: To conserve battery power, the Motion Sensor will be temporarily deactivate for
2 minutes after every trigger event. This helps to control unnecessary push notifications
received on your mobile device.
4. Pair the Power Control Socket
(1) Using 'Smart-i Protect', tap
(2) Choose 'Power Switch' and
in the 'Status' section.
to initiate the pairing process.
23