Smart I SmartHome Security System Installation And Operating Instructions Manual page 20

Manual-2.0-Final_Layout 1 04/04/2016 17:31 Page 20
(4) Please now name your camera and specify the location of where the camera will be installed.
The camera default Security Code is '123456' (previously installed camera may have been
assigned with different security code). Tap 'Save' to complete pairing the camera to the SmartBox.
NOTE: (1) The app will first search for the available
camera connected to the Wi-Fi router.
(2) If the camera cannot be found, please first check to
make sure the camera is powered on and the Ethernet
cable is securely connected to the Wi-Fi router, also
make sure your mobile is connected to the WiFi router.
(3) You can always enter the camera DID/ password
manually. The camera DID is located on the camera
and the default password is '123456'.
(5) If you prefer using your own Ethernet cable, you can now swap out the cable supplied with your
own (Cat 5e patch cable).
20
123456
Status Scenario Event Setting