Pairing The Indoor Siren - Smart I SmartHome Security System Installation And Operating Instructions Manual

Manual-2.0-Final_Layout 1 04/04/2016 17:31 Page 27
6. Pair the Indoor Siren
(1) Using 'Smart-i Protect', tap
(2) Choose 'Siren' and
(3A) Auto Pairing Method
For the Indoor Siren to send out pairing signal,
power using the adaptor or batteries supplied.
in the 'Status' section.
to initiate the pairing process.
Select Device
Status
Gi7-351 GO1-D-038
Camera
on Table Room
Siren
Siren
Siren PowerSwitch
Remote Key
Hallway Book Room
Door Sensor
Door Sensor PIR
Back Door Lounge
Motion Sensor
Remote Key
Power Switch
Status Scenario Event Setting
Status Scenario
Step 1 of 3
Please tap "Pair" to begin pairing
process
Event Setting Status Scenario Event Setting
(3B) Manual Pairing Method
Press the 'Pairing' button located
inside the battery compartment.
Please make sure the Indoor Siren
has batteries inserted or is
connected to an electrical socket
via the adaptor supplied.
27