Smart I SmartHome Security System Installation And Operating Instructions Manual page 48

Manual-2.0-Final_Layout 1 04/04/2016 17:32 Page 48
Sequence Scenario
Allowing the system to automatically react to the sudden situation and carry out other predefined
tasks. For example, once the motion sensor is activated, the camera will begin recording and the
light turns on.
To setup the sequence scenario(s), please go to the Scenario section and follow the steps
below:
1. Tap to select one of the 'initiator' (When...) from the list (example: door/window contact).
2. From the list. tap to select the 'follow-uper' (Then..., example: camera).
3. You can continue (tap ) to include more 'follow-uper'. Tap to complete the setup
or to exit setup.
With the example sequence scenario, once the motion sensor (initiator) detects movement, the
camera (follow-uper) will automatically begin recording.
In order for scenario to function properly, please make sure the sensor(s) in the list are activated
(a). For your chosen camera you will need to check 'Record' so the camera will record video and
'View' for auto video screen popup (MicroSD card required, not supplied).
48