Smart I SmartHome Security System Installation And Operating Instructions Manual page 60

Manual-2.0-Final_Layout 1 04/04/2016 17:32 Page 60
Advance Control
Here you can turn on the 'Zone' function. This function is for advanced users only. The 'Zone'
function can control camera(s) and power switch(s) and can be activated/deactivated with one
single touch. You can have up to 9 Zone controls, with each customised to fit your needs. To
activate the 'Zone' function, please follow the steps below:
1. Go to System Setting, in the 'Advanced Control' section, turn on the 'Advance Control'.
2. The 'Zone' control function will appear at the bottom of the navigation section after exiting
System Setting.
60