Pairing The Water Detector - Smart I SmartHome Security System Installation And Operating Instructions Manual

Manual-2.0-Final_Layout 1 04/04/2016 17:31 Page 29
(3A) Auto Pairing Method
Remove the insulating
plastic tab to start the
pairing signal.
Verifying the Setup
Press the 'Disarm' button
disarmed.
Press the 'Arm' button
select 'Disarm' to deactivate system arming.
8. Pair the Water Detector
(1) Using 'Smart-i Protect', tap
(2) Choose 'Water Detector'' and
(3B) Manual Pairing Method
Press and hold the 'Camera'
button on the front of the
Remote Key until the blue
LED begins flashing.
the SmartBox will beep once indicating the system has been
the SmartBox will beep twice and a 'Countdown' pop-up will appear,
in the 'Status' section.
to initiate the pairing process.
29