Another Useful Feature - Smart I SmartHome Security System Installation And Operating Instructions Manual

Manual-2.0-Final_Layout 1 04/04/2016 17:32 Page 62

Another useful feature

Using the Power Switch as Repeater - Repeater Setup
To Activate the Repeater Function of your Power Switch
First make sure the Power Switch and the end Sensor have been successfully paired/connected to
the SmartBox. See "Sensor Pairing" section for more detail.
Step 1 - Press/hold the button located on the front of the Power Switch until the LED begins to
flash in blue and orange.
Step 2 - While the LED on the Power Switch is flashing blue and orange, activate the pairing
mechanism on the Sensor. The LED on the Power Switch will turn steady orange indicating the
repeater pairing process is complete.
NOTE: You will not be able to control the end
Sensor if the Power Switch (repeater) is
removed. Reinstate the Power Switch to regain
the control and communication between
SmartBox and end Sensor.
62