Smart I SmartHome Security System Installation And Operating Instructions Manual page 11

Manual-2.0-Final_Layout 1 04/04/2016 17:31 Page 11
Wireless
Door/
Window
Contact
Wireless
Indoor Siren
Wireless
Remote
Control
Wireless
Water
Detector
Wireless
Smoke
Detector
Installed on to door/window. After the system is armed the Door/Window
Sensor can alert the system the door/window has been opened
and activate On/Off Switch (turning on light), Siren (alert sound) and
Camera (view/record).
The Siren can be controlled via Smart-i Protect App and Panic Remote
(activate/deactivate) or triggered by other devices such as Camera, Door/
Window Sensor and Motion Sensor.
You can use the Remote Key to ARM/DISARM system, activate camera
recording function and set off Siren. You can predefine which different
sensor(s) you want to work with the Remote Key. The control of the
Remote Key connects with the Smart-i Protect App One-Touch-Scenario.
Detects floods/water ingress. The Water Detector can be controlled via
Smart-i Protect App. It is always armed and will alert the user with its
built-in siren if water is detected. The user has the option to expand the
detection area by adding an additional detection cable.
Detects smoke. The Smoke Detector can be controlled via Smart-i
Protect App. It is always armed and will alert the user with its built-in
siren if smoke is detected. Additionally, the Smoke Detector can be used
as a stand-alone device.
11