Assembly - Exerpeutic 1111.5 Owner's Manual

1. Rear Main Frame Rear Main Frame Rear Main Frame Installation
Remove two Remove two M8x30 M8x30 Bolts (49), four
from the from the Rear Main Frame Rear Main Frame (3).
Connect the Connect the Middle Middle Section Hand Pulse Sensor
Frame (3) to the Extension Hand Pulse Sensor Wire Extension Hand Pulse Sensor Wires (65) from the Extension Hand Pulse Sensor Wire Extension Hand Pulse Sensor Wire Extension Hand Pulse Sensor Wire
Frame (5). Attach the Attach the Rear Main Frame
M8x30 Bolts (49), four s (49), four M8x15
removed. removed. Tighten Tighten bolts with

ASSEMBLY

ASSEMBLY ASSEMBLY
Installation
s (49), four M8x15 M8x15 Bolts (23), and six
(3). Remove bolts Remove bolts with
ection Hand Pulse Sensor ection Hand Pulse Sensor Wires (55) from the ection Hand Pulse Sensor
Rear Main Frame Rear Main Frame (3) into the
M8x15 Bolts (23), and six s (23), and six Ø8 Washer s (23), and six
with the Allen Wrench the Allen Wrench provided.
s (23), and six Ø8 Washer s (23), and six
with the Allen Wrench the Allen Wrench
s (55) from the Rear Main s (55) from the
s (65) from the Front Main
(3) into the Front Main Frame Main Frame (5) with two Main Frame
Washers (24) that were s (24) that were
provided.
9
Tool: Tool:
Allen Wrench S6 Allen Wrench S6 Allen Wrench S6
Washers (24) s (24)
provided.
Rear Main
Front Main Front Main
(5) with two