Exerpeutic 1111.5 Owner's Manual page 16

6. Seat and Back Cushions Seat and Back Cushions Seat and Back Cushions Seat and Back Cushions Installation
Remove eight M6x15 Remove M6x15 Bolts (21) and eight
Seat and Back Cushions (7, 8). Remove Seat and Back Cushions (7, 8). Remove bolts Seat and Back Cushions (7, 8). Remove Seat and Back Cushions (7, 8). Remove Seat and Back Cushions (7, 8). Remove
Screwdriver Screwdriver provided. provided. Then attach the Seat and Back Cushions (7, 8) onto the
Back and and Seat Support Bracket Seat Support Bracket (1) with eight Seat Support Bracket
Washers (58) that were Washer s (58) that were removed.
Phillips Screwdriver provided. Phillips Screwdriver Phillips Screwdriver
ASSEMBLY ASSEMBLY ASSEMBLY
Installation
s (21) and eight Ø6 Washer s (21) and eight
Then attach the Seat and Back Cushions (7, 8) onto the Then attach the Seat and Back Cushions (7, 8) onto the Then attach the Seat and Back Cushions (7, 8) onto the Then attach the Seat and Back Cushions (7, 8) onto the Then attach the Seat and Back Cushions (7, 8) onto the Then attach the Seat and Back Cushions (7, 8) onto the
(1) with eight M6x15
removed. Tighten Tighten bolts
provided.
Tool:
Washers (58) from the back of the s (58) from the back of the s (58) from the back of the s (58) from the back of the
bolts with the M the Multi Hex T
M6x15 Bolt Bolts (21) and eight s (21) and eight Ø6
bolts with the M the Multi Hex
14
Multi Hex Tool with Multi Hex Tool with Multi Hex Tool with
Phillips Screwdriver Phillips Screwdriver Phillips Screwdriver
Tool with Phillips with Phillips
ex Tool with with