Menu Overview; Dmx Mode - SHOWTEC led par 56 short pro rgb User Manual

Menu Overview

The LED Par 56 Short Pro will automatically detect the presence of a DMX signal.
In order to receive a DMX signal, the controller must be attached to a DMX controller by a 3/5-pin DMX
cable and the DMX controller must be turned on.
The LED Par 56 Short Pro system can operate as a 3 or 6-channel DMX fixture.

1. DMX Mode

1) Press the MODE button on the device, until the display shows
2) You can choose 512 different DMX addresses.
Use the Up / Down buttons to select the required address from
.
3) Press MODE to select the number of channels, you want to use.
You can choose 2 different channel settings. The only difference is the small dot behind the numbers.
Use the MODE button to change between 6 or 3 channel mode.
DMX Mode 1 (6 Channels)
DMX Mode 2 (3 Channels)
Static Color Mode
Color Jump Mode
Color Dream Mode
Auto Run Mode
Sound-controlled Mode
Slave Mode
6 Channels
3 Channels
11
.
.