I/O Module" Tab; Figure 20: "I/O Module" Tab - WAGO SYSTEM 750 User Manual

3-phase power measurement module

Hide thumbs Also See for SYSTEM 750:

Table of Contents

Commissioning

8.1.3

"I/O Module" Tab

On the "I/O Module" tab you can do two general settings for the entire I/O

module. These are "Enable watchdog" and "Enable DC measurement". The

watchdog deactivates the green status LED "A" if no process data is received

within 100 ms.

You can also specify the measuring cycle time. The minimum value is 39 ms,

default is also 39 ms. The maximum value is 24375 ms.

WAGO-I/O-SYSTEM 750

750-493 3-Phase Power Measurement Module

Manual

Version 1.2.0

Table of Contents

Table of Contents