Control And Status Bytes; Table 17: Control Byte C0 - WAGO SYSTEM 750 User Manual

WAGO-I/O-SYSTEM 750
750-493 3-Phase Power Measurement Module
4.4

Control and Status Bytes

Table 17: Control Byte C0

Bit 7
Reg_Com
ProcDat_
ID
Channel_
ID
Reg_Com 0:
Manual
Version 1.2.0
Bit 6 Bit 5
Reserved Channel_ID
Here, enter the process data index for the physical variable you wish to read out
using input data word 1.
0: Current (rms)
1: Voltage (rms)
2: Active power
3: Power factor
4: Active energy
5: Max. current
6: Max. voltage
7: Max. active power
8: Frequency
9: Min. current
10: Min. voltage
11: Min. active power
12 .... 15: Reserved
Simple Always 0
process (With the simple process image the channel index has no significance.)
image
Flexible Here, enter the channel index for the channel from which you wish to
process read out a measured value using input data word 1.
image
0: Channel 1
1: Channel 2
2: Channel 3
3: Calibration mode active
Process data communication
1: Register communication
Control Byte C0
Bit 4 Bit 3
Process Image
Bit 2 Bit 1
ProcDat_ID
29
Bit 0