Stored LAP erase function
This function erases the stored LAPs.
To access the function it is necessary to view the
"setting" menu page 48, using button (1, fig. 23)
"▲" or (2, fig. 23) "▼" select the "LAP" function and
press the reset button (12, fig. 21) to go to next page.
Use button (1, fig. 23) "▲" or (2, fig. 23) "▼" to
select "LAP DATA" indication and press the reset
button again (12, fig. 21) to enter the page showing
the previously recorded lap times.
Highlight the "ERASE" item, use button "(1, fig. 23)
"▲" or (2, fig. 23) "▼" to scroll through the stored
LAPs to erase and press the reset button (12, fig. 21)
for 3 seconds. Now, on the lefthand side of the
display you have "PLEASE WAIT..." and then, to
confirm deletion, "ERASE OK" appears for 2
seconds.
You will notice that no stored data will be present any
more and "NO LAP" message will be displayed.
To exit, select "EXIT" and press the reset button (12,
fig. 21).
100