FujiFilm SonoSite Edge II User Manual page 92

4 Press the SELECT key, and position the second caliper.
5 Press the SELECT key. Another caliper appears, and the calculations menu highlights the next
measurement name.
6 Position the caliper, and press the SELECT key. Repeat for each measurement name in the calculation
group.
Note
7 Save the calculation as described in
To calculate Heart Rate (HR)
Heart Rate is available in all cardiac packages. The Heart Rate is not calculated using the ECG trace.
Saving the heart rate to the patient report overwrites any heart rate entered on the patient information form.
1 On a frozen Doppler spectral trace, press the CALCS key.
From the calculations menu, select HR. A vertical caliper appears.
2 Using the touchpad, position the first vertical caliper at the peak of the heartbeat.
Press the SELECT key. A second vertical caliper appears. The active caliper is highlighted.
3 Using the touchpad, position the second vertical caliper at the peak of the next heartbeat.
Save the calculation as described in
To measure Ao, LA, AAo, or LVOT D
1 On a frozen 2D image or M Mode trace, press the CALCS key.
2 From the calculations menu, select the measurement name.
3 Position the calipers.
4 Save the calculation as described in
To measure IVC collapse
1 On a frozen 2D image or M Mode trace, press the CALCS key.
2 From the calculations menu, select the measurement name.
86
Each time you press the SELECT key, another caliper appears, and the calculations
menu highlights the next measurement name.
"To save a calculation"
"To save a calculation"
"To save a calculation"
on page 74.
on page 74.
on page 74.
Exam-based calculations