FujiFilm SonoSite Edge II User Manual page 70

To export patient exams to a USB storage device
You can export patient exams if they are ended. See
A USB storage device is for temporary storage of images and clips. Patient exams should be archived regularly.
To specify file format, see
1 Insert the USB storage device.
2 In the patient list, select the patient exams you want to export.
3 Select Exp. USB on-screen. A list of USB devices appears.
4 Select the USB storage device. If you want to hide patient information, deselect Include patient
information on images and clips.
Note
5 Select Export.
The files finish exporting approximately five seconds after the USB animation stops. Removing the USB
storage device or turning off the system while exporting may cause exported files to be corrupted or
incomplete.
To export patient exams automatically
To export patient exams automatically to a USB memory stick:
1 Make sure that automatic export is enabled. See
2 Insert a USB memory stick into a USB port on the side of the system.
3 End the exam.
To stop in-progress exporting

Select Cancel Export.
To delete images and clips
1 In the patient list, do one of the following:
If deleting a single image or clip, display it. See
If deleting entire patient exams, select them.
64
"USB Devices setup" on page 34.
Only available USB devices are selectable.
"To end the exam" on page 58.
"To specify a file format for exported images"
"To review images and clips"
on page 34.
on page 62.
Images and clips