FujiFilm SonoSite Edge II User Manual page 62

To place text on an image
You can place text in the following imaging layouts: full-screen 2D, full-screen trace, dual, or duplex. You can
place text manually or add a predefined label.
1 Press the TEXT key. A highlighted cursor appears.
2 Move the cursor where desired:
Use the touchpad or arrow keys.
Select Home to move the cursor to the home position.
The default home position depends on the imaging screen layout. You can reset the home position as
described in "To reset the home position"
3 Using the keyboard, type text.
The arrow keys move the cursor left, right, up, and down.
The DELETE key deletes all text.

Word removes a word.
Symbols lets you enter special characters. See
4 (Optional) To add a predefined label, select Label, and then select the desired label group:
. Select the group again for the desired label.
The first number shows which label in the group is selected. The second number is the number of labels
available. See "Annotations setup"
To turn off text entry, press the TEXT key.
To reset the home position
1 Press the TEXT key.
2 Using the touchpad or arrow keys, position the cursor where desired.
3 Select Home/Set.
To place an arrow on an image
You can add an arrow graphic to point out a specific part of the image.
1 Press the arrow key
56
on page 56.
on page 26.
.
"Symbols" on page 18.
, , or
Annotating images