Table of Contents
Advertisement
Appendices
A-1 Sysmac Studio Robot Additional
Option
To perform a Vision & Robot integrated simulation, you need to purchase the "Robot Additional Option,"
a Sysmac Studio option.
To enable the Robot Additional Option, you need to register your license in the Sysmac Studio version
1.14 or higher. You cannot register your license in the Sysmac Studio version 1.13 or lower.
The Robot Additional Option provides the following functions necessary to perform a Vision & Robot
integrated simulation.
• 3D Equipment Model Creation Wizard
• Addition of 3D machine models for the pick-and-place application, including the conveyors for picking
• Calculation of calibration parameters
• Display of images in 3D motion monitoring
A-1-1
Enabling the Sysmac Studio Robot Additional Option
You can use the Robot Additional Option after you take the following procedure on the Sysmac Studio.
1
Install the Sysmac Studio Standard Edition.
Refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504) for how to install.
2
Start the Sysmac Studio and click the License Button on the left side of the startup window.
Then, click the Register License Button.
3
Enter the Robot Additional Option license number, and click the Register Button.
A - 2
NJ-series NJ Robotics CPU Unit User's Manual (W539)
Advertisement
Table of Contents
