Alarm - Motion And Audio Detection - Wansview K2 User Manual

3.4.5 Alarm - Motion and Audio Detection

Alarm > IO Detector
Alarm > Motion Detection (Intruder Monitor)
The IP Camera begins recording when it detects movement/audio and stops recording in
30 sec. In this section, users can customize the motion detection feature. This feature can
be set on the app or in the web interface. Motion is detected by changes in the pixels of
the images.
Please note that motion detection doesn't work through windows. In this case we
recommend to connect an external motion sensor out of the window using the IO alarm
port.
www.wansview.com
35
Camera allows user to add an external source of
alert (motion sensor or push button). We
recommend the Instar IN-500 PIR Sensor as
external motion sensor.
The external sensor can be always open or
always close. Please check your alarm device
setting in the user guide.
The Motion Detection in the Web
Interface is more advanced than in the
App. User can set up to 4 detection
areas and different
corresponds to the lower level and 55 to
the mid-level.
sensitivity. 15