Ddns Setting; Msn Setting; Alarm Settings; Alarm Setting - Wansview NCB-541W User Manual

http://www.wansview.com
Before using UPNP function, please make sure the router's UPNP function has been
triggered. Not all the routers support UPNP perfectly. Please test if the router works well
with the equipment, if not, we would suggest you to disable this function and do the
port-forwarding manually.

5.1.5 DDNS Setting

Please refer to the content in 4.3.

5.1.6 MSN Setting

Figure 17
User needs to apply for a MSN account for this device first, for example:
test1@hotmail.com. Please put this MSN account and its password as above Figure 17.
Then put your MSN account, for example: friend1@hotmail.com, into the 'MSN Friends
List. Then on your friend1@hotmail.com MSN list, you can see test1@hotmail.com is
online. You just send "url?" to test1@hotmail.com and you will get the WAN ip address of
this ip camera. But please make sure test1@hotmail.com and friend1@hotmail.com
should be MSN friends before you do the settings.

5.2 Alarm Settings

5.2.1 Alarm Setting

1） Alarm Detect
User can select the motion detection. If there is any motion, it will detect the motion and
trigger the alarm. In the motion detect sensibility, the larger the figure, the more
sensitive.
As showed in Figure 18, if any external alarm detector is connected, user will be able to
tick "Alarm Input Armed". If the external alarm detector is an always on switch alarm,
please choose "open". If the external alarm detector is always off switch alarm, please
14