Wansview K2 User Manual page 30

Onvif is a global standard for the interface of IP-based security products. The ONVIF
protocol ensures interoperability between products regardless of manufacturer, allowing
you to integrate your IP camera as a generic ONVIF camera into existing security systems.
Enter Onvif Setting. The user can start up and calibrate Onvif functions. The default setting
for Onvif calibration is on.
Note: NVR devices of some manufacturers do not support camera access with Onvif
calibration. Our device supports Onvif versions 2.5 and below.
Network >FTP Settings
FTP Server Address: This field allows the user to designate an IP address or DDNS address
for the FTP server.
Server Port: This field allows the user to designate the port number for the FTP server.
User Name: Input FTP user name.
Password: Input FTP password.
Path: Specify a folder for storing video and pictures, for example: /NCM751GA
Note: If you want to save the alarm picture and video to FTP, you must build an FTP sever,
then create an FTP account with a password (not an anonymous account) on your FTP
server and FTP account must have create and delete file rights.
Network >SMTP (E-mail) Setting
www.wansview.com
30