Wansview K2 User Manual page 27

You can set the camera IP address by your router(DHCP) or you can manually set a fixed
address.
-IP address (for example 192.168.x.x)
-Subnet mask(for example 255.255.255.0)
-Gateway(IP address of your router; for example 192.168.x.1)
-Primary DNS(IP address of your router; for example192.168.x.1)
-Secondary DNS(IP address of your router; for example192.168.x.1)
Network > Port setting
At "Port Setting", users can change web access port (http port). Port setting range:
80-65535. Pay attention not to conflict with other port values.
Network > Wi-Fi setting
www.wansview.com
27