Alarm - Motion And Audio Detection - Wansview Q3 User Manual

Security > IP Filtering
Security > Mask Area (not available for MAC users)

3.4.5 Alarm - Motion and Audio Detection

Alarm > IO Detector (disabled in this model)
www.wansview.com
This screen allows for the
filtering of IP addresses, either
blocking them or granting them
access to the camera.
This feature helps make the
camera more secure by limiting
remote access only to approved
users. Below is a Screen shot of
the IP Filtering screen.
Users exclude up to 4 areas
from monitoring.
Click Start Setting and check the
windows.
Camera allows user to add an
external source of alert
(motion sensor or push
button). We recommend the
Instar IN-500 PIR Sensor as
external motion sensor.
The external sensor can be
always open or always close.
Please check your alarm device
setting in the user guide.
31