Reboot Camera; About Camera; Web Access - Wansview K2 User Manual

Reboot camera if the camera is not working. Please note the setted specification will
change once rebooted.

2.6.7 About Camera

Remember to exit the app after use, to prevent battery draind data consumption

3. Web Access

There is a CD included when you buy the camera, please insert it into the CD driver of your
PC to install the search tool SearchPro to your PC. If your PC doesn't have a CD driver or
the CD can't be read, please go to our official website www.wansview.com/service to
download it.
Please note: SearchPro can only be used in a LAN.
If you lost the label which is on the bottom of the camera and forget the DID number, you
www.wansview.com
On this page, user can check the
camera firmware version and other
data cameras. To update the camera
firmware, user should login in the Web
Interface.
19