Ddns Setting; Alarm Settings; Alarm Setting - Wansview NC543 User Manual

http://www.wansview.com

7.1.5 DDNS Setting

Please refer to the content in 6.2.

7.2 Alarm Settings

7.2.1 Alarm Setting

1） Alarm Detect
User can select the motion detect to enable monitor a certain area, if anything happens
in that area, it will trigger the alarm. In the motion detect sensibility, the smaller the figure,
the more sensitive it is.
2） Alarm Action
After every trigger of alarm during the scheduled time, the device can trigger alarm in
several ways.
Send alarm info by email.
Send the site pictures to the FTP server, user can also set the break time between
two pictures.
Send alarm info to the alarm server.
3） Scheduler
Device will trigger alarm in scheduled time. User can set schedule time to be "all the
time". Please set the system time, time zone, and select the scheduled time. Please refer
to the Figure 15.
Figure 15
15