Advanced Settings - Wansview K2 User Manual

Save Picture to Email: When an alarm is detected, the camera will send two alarm
pictures to the email box. The camera supports Gmail, Hotmail, Yahoo, Gmx ect.
Save Picture to FTP: When an alarm is detected, the camera will send 2 pictures to your
FTP server,3-4 pictures will be sent if the motion is enough frequent. Click on FTP Setting
to setup FTP.
Save Record to FTP: When an alarm is detected, the camera will send a 15 seconds video
to your FTP server; for constant recording, the alarm will be upload to FTP every 30
seconds.
Save Picture to SD/TF: When an alarm is detected, the camera will send 2 pictures to the
SD card.
Save Record to SD/TF: When an alarm is detected, the camera will send a 30 seconds
video to the SD card.
Trigger IO Output: User can add a siren or another alarm device to the camera. When an
alarm is detected, the external IO output will work. Users can choose alarm duration from
5 to 30 sec.
Preset Linkage: When an alarm is detected, the camera will focus on one of the 8 Preset
spots (see above).
Speaker Linkage: When an alarm is detected the speaker will act as a siren for the chosen
length (5-30sec).
Time Deployment
Users can set time and day of the week where the alarm function is active.

2.6 Advanced Settings

www.wansview.com
15