Storage - Wansview K2 User Manual

the SD card.
Trigger IO Output: User can add a siren or another alarm device to the camera (wired).
When an alarm is detected, the external IO output will work. Users can choose alarm
duration from 5 to 30 sec.
Trigger Preset: When an alarm is detected, the camera will focus on one of the 8 Preset
spots (see above).
Trigger Speaker: When an alarm is detected the speaker will act as a siren for the chosen
length (5-30sec).
Trigger indipendently: The alarm will be triggered for any kind of active alarm event
(Motion/ Voice/IO).
Trigger jointly: The alarm will be triggered for multiple detection at the same time
(Motion/ Voice/IO).
Alarm > Armed Time

3.4.6 Storage

SD Card Management(Not support in this model)
www.wansview.com
37
By default alarm is armed 24h/7 days.
Users can choose specific days and
time ranges.