Room Temperature (Room) - Siemens Synco 200 Basic Documentation

Activating the function
Additional functionality
Configuration
Setting values
Display values
Wiring test
Fault status messages
52 / 174
Siemens
Building Technologies
7.7

Room temperature (ROOM)

7.7.1 Activation and functionality
You can activate the function by setting identifier ROOM (outside temperature) at
the respective input.
ROOM (outside temperature) is a special identifier because it creates automatically
a large number of "internal connections". ROOM can only be selected in basic type
A.
The other properties, such as measuring range, troubleshooting, etc., are
described in chapter 0 "Analog inputs".
7.7.2 Settings
Path: ... > COMMIS > CONF > X1
... > COMMIS > CONF > X5
Display Name
LABEL Input identifier
Path: ... > PARA > X1...X5
Display Name
TYPE Type
MIN VAL Value low
MAX VAL Value high
CORR Correction
Path: INFO
Display Name
ROOM Room temperature
Path: ... > COMMIS > TEST
Display Name
ROOM Room temperature
Display Name
Xx --- / ooo Sensor error X...
Universal Controllers RLU2...
Inputs
Range / comments
ROOM
Range
NI, 2XNI, T1, PT, 0-10
−50...+500
−50...+500
−3.0...+3.0
Comments
Positions
Indication of room temperature (at terminal
Xx and as display value ROOM), non-
adjustable
Effect
Non-urgent message; plant not stopped
Factory setting
NI
-50
250
0 K
CE1P3101en
29.08.2008