Leaving Commissioning - Siemens Synco 200 Basic Documentation

User information
Plant is started
Exit
Siemens
Building Technologies
4.6

Leaving commissioning

When you leave the COMMIS (commissioning) menu by pressing the ESC button,
the controller displays the following information to indicate that the plant will be
started:
PASS
COMMIS
Pressing the OK button produces the following results:
Application starts:
•
All sensors are checked, and
–
Existing sensors are marked for future fault status messages
–
The display changes to the next higher menu level and the first menu symbol
•
COMMIS blinks:
PASS
COMMIS INFO PARA
SET
Now press the ESC button twice.
The controller will display an Info page like the following if it is in normal mode:
PASS
Universal Controllers RLU2...
Commissioning
29 / 174
CE1P3101en
29.08.2008