Scan To File - Brother ADS-2400N User Manual

Scan Using Your Computer

Scan to File

The Scan to File feature lets you scan an image to a folder on your hard disk in a supported file format. This
feature allows you to archive your paper documents.
1
Click the SCAN tab.
2
Click (File).
The Scan to File dialog box appears.
3
Configure the scan settings, as needed.
 To scan a 2-sided document, select the 2-sided Scanning check box, and then select Long-edge
binding or Short-edge binding.
 To change the file name, type the file name you want to use for the document (up to 100 characters)
in the File Name box. The current date and a sequential number are added automatically.
 Select the file type for your new image from the File Type pop-up menu. You can save the file to the
default folder, or select your preferred folder by clicking Browse.
 To show where the scanned image is saved when scanning is finished, select the Show Folder check
box. To specify the destination of the scanned image every time, select the Show Save As window
check box.
4
Click Start Scanning.
The image is saved in the folder you have selected.
6
6
109