Brother ADS-2400N User Manual page 152

Scan Using Your Computer
5 Skip Blank Page
Removes blank pages of the document from the scanning results.
The sensitivity of the Skip Blank Page function can be adjusted with the slider. Moving the slider towards
High makes the machine more likely to skip pages, while moving it towards Low makes the machine less
likely to skip pages. If you enable the Show Results setting, the computer displays how many blank pages
have been skipped when the scan is complete.
If the Skip Blank Page function is triggered for all document pages, no scanned image is displayed.
Instead, the computer displays a warning message indicating that all document pages are blank.
6 Continuous Scan
This feature allows you to scan additional documents using the same settings when a scan has been
completed. It is useful when you are scanning more documents than the ADF can hold or when you are
scanning several documents at once.
7 Multifeed Detection
When your machine detects a multifeed, you must confirm that the data scanned so far has been saved,
and then start scanning again at the next page or the beginning of the document.
NOTE
• Disable this setting when scanning thick paper. Otherwise it is more likely for the machine to detect a
multifeed.
• If you enable Carrier Sheet Mode or Plastic Card Mode, you cannot enable Multifeed Detection.
8 Single Paper Scan
Single paper scan feeds one page at a time from the ADF, regardless of the number of pages in the ADF.
6
137