Automatic Daylight Saving Time; Sleep Time - Brother ADS-2400N User Manual

General Information

Automatic Daylight Saving Time

You can set the machine to change the time automatically for daylight saving time. The time is adjusted
forward one hour in Spring and adjusted backwards one hour in Autumn. Make sure you have set the correct
date and time in the Date & Time settings.
The factory setting is Off. To change the Automatic Daylight Saving Time setting to On:
1
Press (All Settings).
2
Press a or b to display Initial Setup.
3
Press Initial Setup.
4
Press Date & Time.
5
Press Auto Daylight.
6
Press On.
7
Press .

Sleep Time

You can enter how long the machine must remain idle (the maximum setting is 90 Mins and the default
setting is 10 Mins) before it enters Sleep Mode. The timer restarts if any operation is carried out on the
machine.
1
Press (All Settings).
2
Press General Setup.
3
Press Ecology.
4
Press Sleep Time.
5
Enter the period of time the machine is idle before entering Sleep Mode.
6
Press OK.
7
Press .
1
1
1
34