Home >
Introduction to Your Brother Machine
Network Device Scan Buttons 1-3
Assign the Scan Functions to Network Device Scan Buttons 1-3
Related Models: ADS-4300N
Assign the following scan to network functions to each Network Device Scan Button if you want to use them as
shortcut buttons:
•
Scan to FTP/SFTP
•
Scan to Network
•
Scan to PC (Network Connect)
•
WS Scan
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If required, type the password in the Login field, and then click Login.
The default password to manage this machine's settings is located on the back of the machine and marked
"Pwd".
4. Go to the navigation menu, and then click Scan > Scan to Network Device.
Start from
, if the navigation menu is not shown on the left side of the screen.
5. Under Network Device1, click the Type drop-down menu and select the scan function you want to assign to
Network Device Scan Button 1.
6. Select a profile name from the Destination drop-down list.
7. Repeat these steps to configure Network Device Scan Buttons 2 and 3.
8. Click Submit.
Related Information
•
Control Panel Overview
>
Control Panel Overview
> Assign the Scan Functions to
14