Routine Maintenance
4
Slide the new reverse roller a into the opening on the left and place it into the machine.
5
Close the reverse roller cover.
6
Close the front cover.
7
Reset the reverse roller counter (see Reset the Usage Counters on page 249).
NOTE
Make sure you have checked the following:
• The reverse roller count value is 0 (see Check Supplies Replacement Cycle
(ADS-2400N / ADS-3000N) on page 240).
• The error message on the Status Monitor has been cleared.
• The Touchscreen or LED indications do not display either a Replace Roller or Replace Parts message.
1
9
248