Change A Scan Button's Default Settings; Scan Specific And Irregular-Sized Documents Using The Carrier Sheet - Brother ADS-2400N User Manual

Scan Using Your Computer

Change a Scan Button's Default Settings

1
Press and hold the Control key on your keyboard, and then click the ControlCenter2 scan button you
want to change. When the menu appears, click Software Button or Device Button. The settings dialog
box appears.
2
Change the settings for File Type, Scan Type, Document Size, Brightness, Contrast, 2-sided
Scanning and Continuous Scanning as needed.
3
Click OK. The new settings are saved as the default settings.

Scan Specific and Irregular-Sized Documents Using the Carrier Sheet

1
Load the Carrier Sheet (see Receipts, Clippings, Photos, and Other Documents on page 66).
NOTE
Load only one Carrier Sheet at a time.
2
Click the (ControlCenter2) icon in the Dock.
The ControlCenter2 window appears.
NOTE
If the (ControlCenter2) icon does not appear in the Dock, in the Finder menu bar,
click Go > Applications > Brother, and then double-click the
The (ControlCenter2) icon appears in the Dock.
(ControlCenter2) icon.
6
6
6
110