Scan Using Web Services (Windows Vista ® , Windows ® 7, Windows ® 8, Windows ® 8.1 And Windows ® 10) - Brother ADS-2400N User Manual

Scan Using the Control Panel
Scan Using Web Services (Windows Vista
®
Windows 8, Windows
If you have installed the driver for scanning via Web Services, the menu that allows you to use Web Services
for scanning appears in Destination field when you click Scan to Network Device in the left navigation bar
(ADS-2400N / ADS-3000N) or on the Touchscreen of the machine (ADS-2800W / ADS-3600W).
For information about installing Web Services, see Install Drivers Used for Scanning via Web Services
®
(Windows Vista , Windows
NOTE
• If the Touchscreen or LED indications show "Out of Memory", decrease the Paper size setting or the
Resolution setting. For more information, see Configuring Settings for Scanning on page 199.
• Certain characters in the messages displayed on the Touchscreen may be replaced with spaces if the
language settings of your OS and your Brother machine are different.
(ADS-2400N / ADS-3000N)
If using ADS-2400N or ADS-3000N, you need to assign WS Scan to one of the three Network Device Keys.
For more information, see Assign the Scan Feature to the Network Device Key 1-3 on page 29.
1
Load your document.
2
Press the ,
The machine starts scanning.
(ADS-2800W / ADS-3600W)
1
Load your document.
2
Swipe left or right.
3
Press WS Scan.
4
Press the type of scan you want to perform.
5
Press a or b to display the destination computer where you want to send the scan.
Press the destination computer.
6
Press Start.
The machine starts scanning.
®
8.1 and Windows
® ®
7, Windows 8, Windows
or button to which you have assigned the Web Service Scan feature.
®
, Windows
®
10)
® ®
8.1, Windows 10) in the Network User's Guide.
®
7,
7
7
198