Brother ADS-2400N User Manual page 275

Troubleshooting
4
Close the front cover.
5
Press any button (ADS-2400N / ADS-3000N) or
NOTE
When clearing the multifeed, you must confirm that the data scanned so far has been saved, and then start
scanning again at the next page or the beginning of the document.
IMPORTANT
• To avoid damage to the jammed document, DO NOT pull the document out before opening the front cover.
• Take out any paper from the ADF before closing the front cover.
• To avoid future document jams, do the following:
• Close the front cover completely by pushing it gently in the centre.
• Configure the settings for your document correctly.
• Clean the reverse roller and pick-up roller. To clean the reverse roller, see Replace the Reverse Roller
on page 247 for instructions on how to pull the reverse roller out from the machine. Clean the rubber side
of the reverse roller with a soft, lint-free cloth moistened with cleaner, and then put the reverse roller back
into the machine. To clean the pick-up roller, see Clean the Scanner and Rollers on page 235.
• Stagger the pages, and then load your document. See Load Documents on page 59.
• Make sure your document is acceptable for the machine. See Acceptable Documents on page 50.
• Load your document correctly. See Load Documents on page 59.
• Load no more than 50 pages at a time.
• To avoid a jams when using long paper, you must select Long Paper for Scan Size or Document Size.
 When you scan from your computer
• Change Scan Settings (ControlCenter4) (Windows
• Change Scan Settings (ControlCenter2) (Macintosh) on page 118
 When you scan from the machine (ADS-2800W / ADS-3600W)
Confirm the following settings on the Touchscreen:
(Scan to USB/FTP/Network/Email Server)
• Scan Type: Colour or Black and White
• Skip Blank Page: Off
(ADS-2800W / ADS-3600W).
®
) on page 99
10
260