Steering Punch(St-Punch); Steering Curve(St-Curve) - Ko Propo EX-1 ASF Instruction Manual

Steering Punch(ST-Punch)

This function quickens the steering's initial response and
can be used to instill a strong turning movement when the
steering initially moves from neutral.
(N:Neutral L:Left R:Right)
Setting Range OFF, 1 - 50%(
The larger the value, the stronger the amount of turning
P
movement.
This could be effective if steering linkages have a lot of slop, but
P
please note that it does not improve straight-line performance.
When using this in conjunction with other functions such as
P
[Steering Speed], adjust one at a time to confirm their effects to
produce an effective overall setting.
:OFF)
Default
Wheel Movement

Steering Curve(ST-Curve)

This function adjusts the ratio of the steering angle to
servo movement speed (Curve Characteristics). Choose
between (+) Quick Curve and (-) Mild Curve.
Setting Range -100 - OFF - 100%(
P As the graph shows, servo movement speed can be changed
according to wheel movement angle.
Positive values (+1 to +100) equal high initial response followed by
mild response.
Negative values (-1 to -100) equal a mild initial response followed
by high response.
When using this in conjunction with other functions such as
P
[Steering Speed], adjust one at a time to confirm their effects to
produce an effective overall setting.
P To adjust only the steering's initial response, use the [Steering
Punch] function.
21
(N:Neutral L:Left R:Right)
:OFF)
Default
Wheel Movement