Throttle Menu(Throttle); Throttle Trim(Th-Trim); Throttle High Point(Th-Point) - Ko Propo EX-1 ASF Instruction Manual

Throttle Menu(Throttle)

Settings related to throttle control.
[Functions]
Throttle Trim
Modify the neutral position of the throttle.
Throttle High Point
Modify the maximum amount of throttle movement (towards
forward acceleration).
Throttle Brake
Modify the maximum amount of throttle brake movement.
Throttle Sub Trim
Modify the overall throttle movement range.
Throttle Trim Rate
Modify the amount of movement which corresponds to one
click of the throttle trim button.
Throttle Turn Speed
Modify the speed of the throttle's movement (towards
forward acceleration).
Throttle Return Speed
Modify the speed of the throttle's return movement.
Throttle Punch
Modify how much the throttle initially accelerates from
neutral position.
Throttle Curve
Modify the movement speed ratio which corresponds to how
much throttle is applied.
Throttle Reverse
Modify the throttle direction.
Throttle Drag Brake
Modify the amount of neutral braking.
Brake Override
Modify of switch the maximum amount of braking.
Throttle ABS
Modify the amount of brake pumping.
Throttle Acceleration
Modify the amount of acceleration burst of the throttle.
Throttle Auto-Start
Set the amount of throttle automatically at startup.
Preset
Modify the neutral position of the throttle trigger.

Throttle Trim(TH-Trim)

Adjusts the neutral/center position of the throttle range.
Also refer to Trim and Sub Trim Operation. (p.12)
(N:Neutral F:Forward B:Brake)
Trim Position
Brake Position
Setting Range F50 - 0 - B50(
Setting adjustments prior to driving should be carried out with the
P
sub trim, not the trim.
The setting range cannot exceed what is set by [Throttle High
P
Point] or [Throttle Brake].

Throttle High Point(TH-Point)

A d j u s t t h e m a x i m u m a m o u n t o f t h r o t t l e f o r w a r d
acceleration movement.
Example
This makes it particularly easy to adjust a glow engine
car's high carburetor setting. For electric cars, this is used
to set the point of the ESC's highest speed.
(N:Neutral F:Forward B:Brake)
High Point Position
Setting Range 0 - 150(
On glow engine cars, an overly high setting value will increase load
P
on the servo and lead to it being damaged. Check carefully while
adjusting.
On electric cars, a setting value that is too small may cause
P
problems with the ESC settings. Make adjustments starting from
the default setting (100).
P If the throttle high point is set low and the trim is set to a high
value toward acceleration, the resulting throttle movement may be
extraordinarily small.
Throttle will not operate if the High Point value is set to 0.
23
High Point Position
Default :0)
Brake Position
:100)
Default