3Ch/4Ch Menu(3/4Ch Menu); Control Menu(Control Menu); Control Mode(Control Mode); 2Way(2Way) - Ko Propo EX-1 ASF Instruction Manual

3CH/4CH Menu(3/4ch Menu)

3Settings related to 3CH and 4CH operations.
[Functions]
3CH Control Menu
Adjusts settings related to 3CH.
4CH control Menu
Adjust settings related to 4CH.
(Currently there is no functionality, but may be available in the future.)
P
The functions which may be set are the same for both 3CH and
4CH. Set them to match the desired purpose.

Control Menu(Control Menu)

Various settings related to the use of channels 3 and 4 may
be adjusted. You can select from 2WAY, 3WAY, 5WAY, and
ANALOG operations, which can be set in control mode
according to the desired purpose.
[Functions]
Control Mode
Set the usage choice for channels 3 and 4.
(select from 2/3/5WAY, ANALOG)
2WAY
Modify the 2-interval output settings.
3WAY
Modify the 3-interval output settings.
5WAY
Modify the 5-interval output settings.
ANALOG
Modifies settings for analog (continuous) output.
(For example steering and throttle.)

Control Mode(Control Mode)

Set the usage choice for channels 3 and 4.
Setting Range ( Default
(Modify the 2-interval output settings.)
2WAY
(Modify the 3-interval output settings.)
3WAY
(Modify the 5-interval output settings.)
5WAY
(Modifies settings for continuous output.)
ANALOG
For example steering and throttle.

2WAY(2WAY)

Modify the 2-interval output settings.
Example
May be used to activate/deactivate an engine starter unit
or a semi-trailer's support legs.
START position (white square)
Position aside from START (black square)
Setting Range
START:POS 1, POS 2(
Sets the starting position.
KEY:OFF, ET1 - 5, BT1(
Assigns a key to use for switching positions.
POS 1:-100 - 100%(
Default
Sets Position 1's output position.
POS 2:-100 - 100%( Default
Sets Position 2's output position.
Button:PUSH,TGLE(
Default
When use TikiTiki
Start: POS1
POS1: 0
KEY: your choice Button :PUSH
32
:OFF)
,
,
,
,
Default :POS 1)
:OFF)
Default
:-100%)
:100%)
:PUSH)
POS2 :-100