Steering Turn Speed(Turnspeed); Steering Return Speed(Retnspeed) - Ko Propo EX-1 ASF Instruction Manual

Steering Turn Speed(TurnSpeed)

This function limits the maximum speed of the steering
servo by adjusting the steering turn direction [TURN]
setting. The steering angle between neutral and full
lock is split into two zones and each may be adjusted
independently (2WAY).
Setting Range
TURNPOS:1 - 100%( Default
This sets the point at which the two speed zones are split.
TURN 1:1 - 100%(
Default
This sets the speed from when the steering has begun to turn.
TURN 2:1 - 100%(
Default
This sets the speed from after the split to the second zone.
You can set the speed to be slow during initial turning, then
P
subsequently faster.
If your car flips on high-grip surfaces, lower the [TURN 1] value to
P
make cornering easier.
P
[Changing to 1WAY]
Changing [TURNPOS] to 100 will deactivate [TURN 2] and [TURN
1] will be used to set the speed.
Take into account such factors as the servo used, car, driving
P
surface, etc. when adjusting all settings. Conduct test drives to find
the best setting values.
Effective speed values are dependent on the speed characteristics
P
of your selected servo.
(N:Neutral)
:100%)
:100%)
:---%)
Elapsed Time
Full Lock
Wheel Operation Wheel Operation
Begin Turn
Neutral
Elapsed Time
Full Lock
Servo Movement Servo Movement
Neutral
Different values will affect the graph's appearance

Steering Return Speed(RetnSpeed)

This function limits the maximum speed of the steering
servo by adjusting the steering return direction [RETURN]
setting. The steering angle between neutral and full
lock is split into two zones and each could be adjusted
independently (2WAY).
Setting Range
RETNPOS:1 - 100%(
This sets the point at which the two speed zones are split.
RETN 2:1 - 100%(
Default
This sets the speed before the split position point.
RETN 1:1 - 100%(
Default
This sets the speed from after the split to the second zone.
P
[Changing to 1WAY]
Changing [RETNPOS] to 100 will deactivate [RETN 2] and [RETN 1]
will be used to set the speed.
Take into account such factors as the servo used, car, driving
P
surface, etc. when adjusting all settings. Conduct test drives to find
the best setting values.
Effective speed values are dependent on the speed characteristics
P
of your selected servo.
Quick Operations
Return
Speed Position
Servo Speed
20
(N:Neutral)
Default :100%)
:---%)
:100%)